Laminating Inspection for Corrugated cardboard laminator

After adjusting the semi-auto laminator, the pre-treated prints are fed into the feeding mechanism for laminating, and samples are obtained for inspection.

Before laminating with a small amount of printed matter for inspection, so as not to cause a lot of waste, after passing the test, you can carry out large quantities of production.

Laminator

The laminating Inspection is used as follows.

1.Semi-automatic laminator to laminating completed sample sheet laminating a corner of the film to the wide direction of tearing, hold down the paper, the width of the direction of all the tearing, and then all the tearing. After tearing, if the printed surface graphic imprints with the adhesive layer and paper fibers transferred to the film, it shows that the printed materials and film adhesion is good, as a qualified product.

2. The laminating samples into the baking channel, 60-65℃ baking for about 30 minutes. If there is no blistering phenomenon, does not produce delamination, not wrinkled, for qualified products. Tear the film after baking should not be intact and paper separation.

Laminator

3. Put the specimen into cold water for 1 hour and then takes it out. If the plastic film is not detached from the printed material, it is qualified.

4. Put the specimen on the indentation machine and applies pressure. If the pressed out concave and convex part does not delaminate, it is qualified.

Komen

Mesin Karton

Blog Terkini

Tag
Pencetak flexo 2 warna Pencetak flexo 4 warna Laminator Seruling Automatik Laminator automatik pencetak karton Pengeluaran Kadbod Beralun Barisan pengeluaran papan kertas beralun Penyusun Die Cutting Pelekat Keping Berganda Mesin Pelekat Double Piece Mesin Laminating Filem Laminator filem Pencetak flexografik Mesin cetak flexographic Mesin Laminating Seruling Laminator Seruling Mesin karton empat warna Pemotong mati empat warna Pencetak flexo empat warna Gluer machine Mesin gam Pelekat Berganda Berkelajuan Tinggi Laminator berkelajuan tinggi Mesin Pemotong Dakwat Cetakan Mesin Laminating Laminator Laminator kelajuan sederhana Paperboard separator Slotter Pembahagian Pemotong mati bebas plat Pre-coating film laminator Mesin pemotong mati berputar Mesin lamina semi auto Laminator separa automatik Mesin slotting percetakan dakwat dua warna separa automatik Garis Kadbod Beralun tujuh lapis Penyusun Pemotong Mati Slotting Small grooving machine Small slotter Stacking machine Mesin jahitan Mesin pengikat Mesin pisau nipis Pencetak Flexo Tiga Warna Mesin pencetak flexo dua warna

Blog Berkaitan

Selamat datang ke blog kami yang didedikasikan untuk dunia mesin slot cetak karton yang menarik. Di sini, kami menyelidiki cara kerja yang rumit dan nilai besar yang dibawa oleh mesin ini kepada industri pembungkusan.