Laminating Inspection for Corrugated cardboard laminator

After adjusting the semi-auto laminator, the pre-treated prints are fed into the feeding mechanism for laminating, and samples are obtained for inspection.

Before laminating with a small amount of printed matter for inspection, so as not to cause a lot of waste, after passing the test, you can carry out large quantities of production.

The laminating Inspection is used as follows.

1.Semi-automatic laminator to laminating completed sample sheet laminating a corner of the film to the wide direction of tearing, hold down the paper, the width of the direction of all the tearing, and then all the tearing. After tearing, if the printed surface graphic imprints with the adhesive layer and paper fibers transferred to the film, it shows that the printed materials and film adhesion is good, as a qualified product.

2. The laminating samples into the baking channel, 60-65℃ baking for about 30 minutes. If there is no blistering phenomenon, does not produce delamination, not wrinkled, for qualified products. Tear the film after baking should not be intact and paper separation.

3. Put the specimen into cold water for 1 hour and then takes it out. If the plastic film is not detached from the printed material, it is qualified.

4. Put the specimen on the indentation machine and applies pressure. If the pressed out concave and convex part does not delaminate, it is qualified.

Opmerkingen

Kartonmachines

Nieuwste machines

Laatste blog

Labels

Gerelateerde blog

Welkom op onze blog gewijd aan de fascinerende wereld van de kartondrukmachines. Hier verdiepen we ons in de ingewikkelde werking en de enorme waarde die deze machines voor de verpakkingsindustrie bieden.

Innovative Corrugated Board Production Line Trial Run

After a year of construction, the annual output of 150 million square meters of corrugated board production line construction project, officially entered the trial production stage, become the largest width, the highest speed, single-machine capacity of the largest high-strength corrugated board production line in our city.

Lees verder "

How Flute Laminator Machine Assure Quality of Corrugated Box

Flute laminator machine plays a crucial role in the production of corrugated packaging, providing a vital link between paper and cardboard to create durable and visually appealing products.

Lees verder "

Wat zijn de stappen in het stansproces

Stansen, het proces waarbij een scherpe matrijs wordt gebruikt om vormen uit verschillende materialen te snijden, is een veelzijdige techniek die in tal van industrieën wordt gebruikt, van handwerk en scrapbooking tot verpakking en productie.

Lees verder "