Linie automată de producție a cartonului ondulat cu 2/3/5/7 straturi
Descriere
Fully automatic corrugated cardboard production line is used to produce corrugated cardboard with different layers, including 2-layer, 3-layer, 5-layer and 7-layer structures. It usually includes automatic paper feeding, corrugated roll pressing, glue bonding, cardboard forming, drying, cutting and stacking, etc. It is capable of fully automated production from raw materials to finished products.
Fisa tehnica
Model | WJ200-2200-5PLY |
Grade | Min. B |
Moisture content | 11% ± 2% |
Face paper | 100~250 g/m2 |
Liner paper | 100~250 g/m2 |
Corrugated paper | 100- 200 g/m2 |
Flute profiles | A,B,C,E,F,G flute |
Steam requirements | 8-10 Kg |
Steam consumption | 2500 kg/h |
Air compressor pressure | 0.8~1.1 Mpa |
Electricity | 380V, 50Hz, three-phase four wire type |
* Equipment Direction | Left or Right transmission will be as required |
* Factory request size | Specific length as to the foundation of drawing |
* Note: the roll paper which is used to test the corrugated cardboard production line speed should meet above requirements.
Caracteristici principale
1. High degree of automation
The corrugated cardboard production line can realize the fully automated production process from raw materials to finished products.
2. High production efficiency
Through automation control, it improves production efficiency and reduces labor cost, and at the same time, it can realize non-stop order change and improve production continuity.
3. Energy saving and environmental protection
The requirements of energy saving and environmental protection are taken into account in the design, and energy consumption and material waste are reduced by optimizing the production process and equipment configuration.
4. Intelligent management
Combined with Industry 4.0 technology, it realizes intelligent management of the whole corrugated cardboard production line and intelligent control from customer order to production to logistics packing.
5. Stability and reliability
Adopting advanced technology and equipment to ensure the stability and reliability of the corrugated cardboard production line and reduce the failure rate.
6. Precise control
Through advanced control technology, it realizes automatic monitoring and adjustment of raw paper feeding temperature, humidity and tension, so as to precisely control the physical properties of raw paper.
7. Green design
Resource consumption, ecological and environmental impacts as well as human health and safety are taken into account in the design, which meets the requirements of green design.
8. Safety performance
The corrugated cardboard production line is designed with full consideration of mechanical and electrical safety to ensure the safety of operators.
9. Strong adaptability
It can adapt to the production demand of multi-specification and multi-species to meet the diversified order requirements of the market.
10. Production management system
Equipped with production management system, it can realize the collection, statistics and printout of production data and improve the production management level.
Lista de configurare (partea inițială)
No. | Nume | Qty | Feature |
1 | RSH Hydraulic Mill Roll Stand
( with trolley and track) |
5 | –Main shaft φ242mm,double curve heavy rocker arm, tooth chuck, pneumatic type multi point brake,hydraulic lifting,left and right translation
–Guide rail length is 6000 mm, the trolley adopt 10 mm plate welding |
2 | Auto-Splicer | 5 | –Keeping the corrugated board line uninterrupted working, reducing paper loss and greatly improving productivity |
3 | PH-90 Pre-heater | 4 | –The roller φ900 mm, Electric adjustment angle, adjusting heating area within the range of 360 ° |
4 | SF-A22Single Facer | 2 | –Corrugated rollerφ360mm, 48CrMo high quality alloy steel,plating tungsten carbide
–Independent gearbox,universal joint drive structure –Cylinder control lifting –Pneumatic control glue,circulating supply glue –Man-machine display |
5 | OBH Conveying Bridge | 1 | –The main beam is connected with the GB 200 channel steel, 200H steel, 63 angle steel
–Independent frequency motor drive paper conveying –Suction tension and electric correcting |
6 | Trriplex Pre-heater | 1 | –The rollerφ900 mm,electric adjustment angle angle , adjusting heating area within the range of 360 ° |
7 | GM-20 Glue Machine | 1 | –Glue roller φ269mm , carved 25 line pit type mesh –With preheater device
–Independent frequency motor drive –Circulating supply glue with PLC control –Man-machine interface display |
8-14 | DF-60 Double Facer, etc. | 7 | Vă rugăm să ne contactați pentru mai multe detalii |
Chuang Xin Carton Machinery, este un producător de frunte și furnizor de soluții de mașini de ambalat și imprimat carton. Situat în Changsha, capitala de renume mondial a materialelor de ambalare, CX Machinery a fost înființată ca parte a Carton Machinery and Printing Equipment și este înregistrată conform standardelor ISO14001 și OHSAS 18001 de către CQC. Avem o echipă de ingineri cu mai mult de 10 ani de experiență în producție în domeniul mașinilor de carton, precum și o echipă de vânzări pricepută pentru a oferi sprijin deplin clienților noștri.
CX Carton Machinery proiectează, produce și vinde mașini de ambalare a cartonului de înaltă calitate, cum ar fi instalații de cutie ondulată, linie de producție de carton ondulat cu 2/3/5/7 straturi, mașină de tăiat pentru imprimantă flexo, mașină de tăiat rotativă, mașină de tăiat rotativă, lipitor automat de mașini de carton. Pe lângă producția mașinilor de mai sus, CX Machinery se angajează să personalizeze flexibile unele mașini auxiliare pentru fabricarea cartonului.
Cu o calitate constantă și servicii excelente din 2009, am stabilit parteneriate de afaceri profunde cu clienți de peste mări din peste 40 de țări.