Laminating Inspection for Corrugated cardboard laminator

After adjusting the semi-auto laminator, the pre-treated prints are fed into the feeding mechanism for laminating, and samples are obtained for inspection.

Before laminating with a small amount of printed matter for inspection, so as not to cause a lot of waste, after passing the test, you can carry out large quantities of production.

Laminator

The laminating Inspection is used as follows.

1.Semi-automatic laminator to laminating completed sample sheet laminating a corner of the film to the wide direction of tearing, hold down the paper, the width of the direction of all the tearing, and then all the tearing. After tearing, if the printed surface graphic imprints with the adhesive layer and paper fibers transferred to the film, it shows that the printed materials and film adhesion is good, as a qualified product.

2. The laminating samples into the baking channel, 60-65℃ baking for about 30 minutes. If there is no blistering phenomenon, does not produce delamination, not wrinkled, for qualified products. Tear the film after baking should not be intact and paper separation.

Laminator

3. Put the specimen into cold water for 1 hour and then takes it out. If the plastic film is not detached from the printed material, it is qualified.

4. Put the specimen on the indentation machine and applies pressure. If the pressed out concave and convex part does not delaminate, it is qualified.

Izohlar

Karton mashinalari

Eng so'nggi blog

Teglar
2 rangli flekso printer 4 rangli flekso printer Avtomatik Fleyta Laminatori Avtomatik laminator karton printer Gofrirovka qilingan karton ishlab chiqarish Gofrokarton karton ishlab chiqarish liniyasi Qatlamni kesish mashinasi Ikki qismli yopishtiruvchi Ikki qismli yelimlash mashinasi Filmni laminatsiyalash mashinasi Film laminator Fleksografik printer Fleksografik bosma mashinasi Fleyta laminatsiyalash mashinasi Fleyta laminatori To'rt rangli karton mashinasi To'rt rangli to'sar To'rt rangli flekso printer Gluer machine Yelimlash mashinasi Yuqori tezlikda ikki qismli yopishtiruvchi Yuqori tezlikli laminator Murakkab bosma qolipni kesish mashinasi Laminatsiyalash mashinasi Laminator O'rtacha tezlikli laminator Paperboard separator Partition Slotter Plitkasiz o'lik to'sar Pre-coating film laminator Aylanadigan qolipni kesish mashinasi Yarim avtomatik laminatsiya mashinasi Yarim avtomatik laminator Yarim avtomatik ikki rangli siyoh bosib chiqarish o'rnatish mashinasi Etti qatlamli gofrirovka qilingan karton liniyasi Slotting Die Cutting Stacker Small grooving machine Small slotter Stacking machine Tikuv mashinasi Bog'lash mashinasi Yupqa pichoq mashinasi Uch rangli flekso printer Ikki rangli flekso bosib chiqarish mashinasi

Tegishli blog

Karton bosib chiqarish o'yma mashinalarining ajoyib dunyosiga bag'ishlangan blogimizga xush kelibsiz. Bu erda biz ushbu mashinalar qadoqlash sanoatiga olib keladigan murakkab ishlarni va ulkan qiymatini ko'rib chiqamiz.

Corrugated board production line

Innovative Corrugated Board Production Line Trial Run

After a year of construction, the annual output of 150 million square meters of corrugated board production line construction project, officially entered the trial production stage, become the largest width, the highest speed, single-machine capacity of the largest high-strength corrugated board production line in our city.

Ko'proq o'qish "

Get OUR QUOTATION

Please let us know your request, we will get back to you within an hour.

Any machinery problem can be solved

Make an Appointment with a 1-to-1 Machinist

Everything we do is for the efficient production of your cardboard

Speak Directly with Our Boss!

Got a question? Contact me directly

and you are welcome to visit the factory.